Core Concepts | Holosun EPS Carry Reset

Wiki Article

The Holosun EPS Carry is a popular choice for concealed carry enthusiasts. But even with its intuitive design, sometimes you need a solid reminder on the basics. This article dives into the essentials of resetting your Holosun EPS Carry, ensuring you're always ready to deploy. We'll cover everything from familiarizing yourself the reset mechanism to troubleshooting common issues. Let's get back to basics and make sure your Holosun EPS Carry is performing at its peak

By understanding these fundamentals, you can ensure your Holosun EPS Carry is always ready when you need it most.

Rebooting Your Holosun EPS Carry Red Dot

Your Holosun website EPS Carry red dot sight is a robust piece of kit, but even the best gear can sometimes need a little TLC. If your EPS Carry seems to be malfunctioning, a simple reboot might just do the trick.

First, locate the power button on the side of your red dot sight. It's usually a small, tactile switch. Press and hold this switch for about 3 seconds until you see the red dot flash. This indicates that your Holosun EPS Carry is now off and ready to be rebooted.

Once the sight has powered down, release the switch and wait for a couple of seconds. Then, press the activation switch again to power on your red dot. The red dot should now appear as normal.

If this simple reboot doesn't resolve your issue, you might want to consult the user manual or contact Holosun customer support for further assistance.

Factory Reset for the Holosun EPS Carry

Performing a factory reset on your Holosun EPS Carry can be useful if you're experiencing troubles with the sight or simply want to return it to its original configuration. This process will erase all personalized settings and restore the sight to its factory defaults.

To begin, identify the small reset button on the side of your EPS Carry. Use a thin object like a paperclip or the tip of a pen to press this button. Hold it down for approximately five seconds until you see the screen blink. Release the button and your Holosun EPS Carry will now be reset to factory settings.

Restore to Factory Settings on Holosun EPS Carry

Need restore your Holosun EPS Carry back to its original configuration? Follow these simple instructions.

First, locate the small activation switch on the bottom of your EPS Carry.

Using a small tool, gently press and depress the button for approximately 3 seconds. You should see the display change, indicating that the restore process is in progress. Release the button and your Holosun EPS Carry will now be back to factory settings.

Resetting the Holosun EPS Carry Red Dot to Default

Occasionally, you may need to revert your Holosun EPS Carry Red Dot to its factory settings. This method is easy and can be completed in a few moves. First, ensure the sight is switched off. Next, locate the tiny button on the rear of the optic.

Depress this lever for around five units. You should see a flashing signal on the display, which signifies that the adjustment is finished. Release the lever and your Holosun EPS Carry Red Dot will now be at its default settings.

Unlocking Default Settings: Holosun EPS Carry Guide

Navigating the realm of red dot sights can be a challenging task, especially when you're introduced into the feature-packed Holosun EPS Carry. This compact and powerful optic is designed to thrive in a carry scenario, but unlocking its full potential demands understanding its default settings. This guide will illuminate the key tweaks you can make to fine-tune your EPS Carry for a seamless carry experience.

Report this wiki page